Electric Heating Systems

Electric Radiant Floor installation has today emerged as one of the most effective ways to heat individual rooms in any residential or office setup. They offer greater flexibility compared to hydronic systems, which are used only for whole house heating.



Electric floor heating can be used in kitchens, bedrooms or the living room where you spend most of your time, when you are at home. You can install electric underfloor heating under every imaginable area like tile, stone, wood or carpet. However, in a bathroom you have to install a thermostat control with your electric radiant floor. And it is slightly costlier to get electric floor heating in kitchens, as the area here is comparatively larger depending on individual houses.



Electric radiant floor installation is an easy process and can be done both by a Do-it-yourselfer or a professional installer. For DIY projects, all you have to do is to buy a radiant roll and a simple thermostat control. However, the final electrical hook-up should be performed by a licensed electrician.



Using electric floor heating method is beneficial for warming your favorite rooms for various reasons. This installation method is comparatively cheaper than hydronic heating. In fact, electric radiant floor is the most cost effective method when it comes to heating individual rooms and also uses Pex tubing if you wish to have warm floors in all the areas on your house floors.



Moreover, this form of heating is cost saving as they do not take much time to spread the warmth across the required area or room. This is because the electric mats are placed just under the flooring material and hence takes only around 30 to 60 minutes to heat. This is unlike hydronic heating system which takes ample time for heating. The best part is that you can control electric floor heating system with a timer and a thermostat that enable you to preset ON-OFF cycles to get heat only when it is required.



Electric radiant floor systems are also ideal for homeowners. This is because its maintenance and repair cost is less compared to other underfloor heating options. Even if you use it for remodeling or renovation work, this heating system is simply the best.

PEX tubing is being extensively used these days in all kinds of heating needs both in residential as well as commercial areas. And the reasons for these are many. Here are few factors that give PEX tubing an edge over the others in underfloor heating.

• Excellent carrier of water: One of the many advantages of PEX tubing is that it is an excellent carrier of water and hence is a reliable and durable solution for heating pipe needs in all industrial areas.


• Economical solutions: PEX tubes are cheaper than other materials used in radiant floor heating. For example the prices of metals are all time high and are growing each passing day. PEX tubing on the other hand is cost effective as well installation time is comparatively less.


• User friendly installation: For installation purposes, PEX tubing is the best as they are flexible and can be bent even round the corners. This is unlike the case with metal which are rigid and are a practical problem to install through floor joist.


• Easy joining method: Unlike other metal tubes, PEX tubes can be joined with cheap tools and using the cinch ring method without the use of solder, heat, pastes and glues.


• Durability: PEX tubing is better than metal tubing for radiant floor heating as they are resistant to pitting, corrosion, water hammer and scale build-up.


• Leak resistant: PEX tubes are extremely durable and reliable. They perform great even in adverse conditions like when the temperature is below zero degrees. This is especially great in cold countries where PEX Tubing is extensively used for Underfloor Heating etc. purposes.


• Versatility: PEX tubes are versatile and can be used in water distribution systems; ice melt systems and sprinkler systems other than in radiant floor heating.


• Energy efficient solution: These tubings are energy efficient solutions as they can retain more Btu per foot than other metal pipes.